BRISTAN MONZA KITCHEN MONOBLOC TAP SPARES
Replacement spare parts for the Bristan Monza 28 spline MZ SNK EF C easyfit. 28 Spline cartridge known by 2998828300
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.
Please note the cartridges fitted into the Monza tap have changed over the years causing confusion.
You will need to remove your tap handle to check you are purchasing the correct version.
This is the 28 spline version x 52mm tall. Known by Bristan part code 3602R / 3491R / 2998828300.
If you need the 20 spline (1212R) then please
clickhere
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
You will need our anticlockwise for the cold and clockwise for the hot side.
If your tap is leaking from where the spout joins the base of the tap (the neck) then you need to replace the spout o rings.
original code 1239R (our code SK22-S).
If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 /1263R. Your original part may have Neoperl stamped around the edge.
Handle replacements available, sold as a pair (hot and cold). Our SH00MZ handles are compatible with the 28 spline cartridge version.
Blue & red tap indice / indicator / screw cover caps available (sold as a pair). Our SI01-S are chrome plastic.
Replacement serrated washers now available. Sold as a twin pack (SWSS-T).
Frequently asked questions about your Bristan Monza tap.
How To remove the Bristan Monza handle / lever?
Remove handle indicator / indice by prising it off. You can then remove the handle retaining screw with a crosshead screwdriver.
You will have a serrated washer fitted here. This will need to be reused. You can purchase a replacement if misplaced (SWSS-T).
Now pull the handle away from the tap body to reveal the valve.
How do I remove the Monza spout to replace the o'rings?
Unscrew locking collar at base of spout and pull spout up and out of tap body.
We recommend to apply grease on the new o rings (SK22-S).
When I have replaced my handle the handle is wobbly/loose?
There is a serrated washer which will is between the handle screw and tap handle.
Re-use this serrated washer underneath the new screw. Replacements available (SWSS-T).
How can I stop my Bristan Monza tap from dripping?
You will need to replace the cartridges.
If you are unsure which side has failed you will need to isolate the supply to the hot and cold.
If you can't determine which side is leaking you should replace both sides.
You can find the Monza tap diagram/instructions below.
2998828300 Pair Hot Cold Valves inserts glands