sales@tapmagician.co.uk 01444871313

Trade Registration | Shopping Basket 0

Compatible Spare Parts for the Valves by part number PAINI ASME A112 18 1UPC ANSI NSF61 KK GN90

Please select from the available product options shown below
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ASME-53QA-ABAnticlockwise (to open) blue1/2" Cartridge 20x53mm£11.99 Tomorrow
ASME-53QA-CRClockwise (to open) red1/2" Cartridge 20x53mm£11.99 Tomorrow
ASME-53QA-PPair (1 x red, 1 x blue)1/2" Cartridge 20x53mm£23.98 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SV40-PPair (1 x red, 1 x blue)1/2" Cartridge 55mm with 40 spline £33.00 Tomorrow
SV55-PPair (1 x red, 1 x blue)1/2" x 55mm with square end£34.98 Tomorrow
SV60A-PPair (1 x red, 1 x blue)1/2" x 55mm with Round End£34.98 Tomorrow
SA16-SSingle40 teeth Spline adaptor£6.00 Tomorrow
SA60-SSingleRound Brass Adaptor £6.99 Tomorrow
SH44-SSingleHandle Plain (for Hot or Cold)£12.99 Tomorrow
SV40-PH44Pair Cartridges + Pair Handles1/2" Cartridge 55mm with 40 spline £49.99 Tomorrow
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tomorrow

PAINI SHORT STEM VALVE STAMPED PAINI ASME A112.18.1UPC ANSI NSF61 KK GN90

There are two versions of cartridge stamped with this number. This is the Short stem 53mm length cartridge (cartridge 544).

If you need the Long stem 56mm version please clickhere

544 hot valve, 544 cold valve,53CC581AD,53CC581AS

A112,53CC581ASA, 53CC581ADA, 112181,A112181UPC, A112.18.1UPC,A112.18, A11218.IUPC, A11218,A112180PC, A1121810, A1121810PC, A11218UPC,A112A1310
Valve stamped with this coding is also avilable with different top parts, 40 spline = SV40, Square end version =SV55, Rounded top version = SV60A.
Our handle replacements utilise the SA16 handle adaptor (please note our handles are plain and do not have H or C stamped on them)

FAQ
How do I remove my tap handle/head?
There will be a small screw covering cap on the underside of the handle. Remove this cap it will pop out.
Pull the tap handle off. You may need to use some force to remove this.

How do I replace the cartridge?
Make sure the water is turned off, you can do this at the mains or with isolation valves under the sink.

How do I know if I need the spline adaptor?
Please remove the handle of your tap and check which (if any) spline adaptor your current cartridge utilises. Sometimes these can be removed and reused.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.