Compatible Spare Parts for the Bristan Renaissance monobloc

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
RenMonoQA-ABAnticlockwise (to open) blue1/2" x 20 x 52mm £4.50 Tuesday
RenMonoQA-CRClockwise (to open) red1/2" x 20 x 52mm £4.50 Tuesday
RenMonoQA-PPair (1 x red, 1 x blue)1/2" x 20 x 52mm £9.00 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SWSS-SSingleSerrated Washer£0.99 Tuesday
Si01-SSingleTap indices set£5.50 Tuesday
ST17-SSingle17mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday

Replacement Spares for Renaissance Kitchen Monobloc Mixer Easyfit tap model RS SNK EF C.
Spare part known by codes 99067XX02S / 19MC090R53.04, 19MC090L29.04, 2998827000.

This is the cartridge with 20 teeth on the spline.
Please note over the years there has been a change of part fitted and some renaissance monobloc models take a 24 spline cartridge.
We recommend to remove the handle and count the splines. If you need the 24 spline version please clickhere

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

How to remove the Bristan Renaissance Kitchen Monobloc tap handle?
See instruction diagram below.



Watch our how to video for further general guidance on removing tap handle and replacing tap cartridge.


Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.