Compatible Spare Parts for the Bristan Cashew

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
CashewQ4-CRClockwise (to open) red1/2" Cartridge x 20 x 51mm NTC£6.00 Today
CashewQ4-ABAnticlockwise (to open) blue1/2" Cartridge x 20 x 51mm NTC£6.00 Today
CashewQ4-PPair (1 x red, 1 x blue)1/2" Cartridge x 20 x 51mm NTC£12.00 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK33-SSingleSpout O Ring Kit £6.99 Today
SL05-SSingleLubricant£3.50 Today
ST17-SSingle17mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today

BRISTAN CASHEW KITCHEN TAP SPARES FS0717

Tap Magician compatible replacement parts to repair the Bristan Easy Fit Cashew Kitchen Monobloc Tap CSH EFSNK C.
Watch video below for step by step tutorial how to replace the tap cartridges.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 5504450. May have hassem stamped on body of cartridge.

Cartridge has 20 teeth on spline and come supplied with M4 screws.
Replacement hot and cold cartridges available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
This is our SK33 kit. We recommend lubricating the new o rings with silicone grease.

You can find the Cashew tap diagram/instructions below.

How do I remove the Bristan Cashew Tap handle/head?
Remove screw covering cap from the end of the handle.
Use crosshead screwdriver to undo screw and pull tap head off. You may need to use some force.

How do I remove the cartridge from the tap?
Use our box spanner (STBOX) to undo cartridge (unscrews anticlockwise)

How do I remove the spout?
p Remove the rubber screw cover from the back you will need to pop this out. Use 2.5mm allen key to undo spout.
Pull spout up and out of tap body. Replace with new o rings.
You will need to apply silicone grease to the new o rings.

How do I stop my tap dripping?
If your tap is dripping you need to replace the cartridges. If you can isolate the supply to the hot and cold you can identify which side is leaking.
If you aren't able to identify which side has failed we recommend to replace both.

easyfit

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.