sales@tapmagician.co.uk 01444871313

Trade Registration | Shopping Basket 0

Compatible Spare Parts for the Franke Danube

Please select from the available product options shown below
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
DanubeP2-ABAnticlockwise (to open) blue1/2" Cartridge 18 x 53mm NTC£12.99 Today
DanubeP2-CRClockwise (to open) red1/2" Cartridge 18 x 53mm NTC£12.99 Today
DanubeP2-PPair (1 x red, 1 x blue)1/2" Cartridge 18 x 53mm NTC£25.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SRBLK-SSingleMale Thread 24mm Black£4.40 Today
SI01-SSingleTap indices set£5.50 Today
SL05-SSingleLubricant£3.50 Today
SL50-SSingleRegin Grease 50ml£9.99 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today
SK22-SSingleSpout O ring repair kit£5.00 Today
SS10-TTwin packM4 x 10mm screw£1.80 Today


Tap Magician compatible spares / parts to repair the Franke Danube Mono Mixer Kitchen tap.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 3819R and SP3819R.
< This is the 18 spline cartridge which fits in the original Danube tap. (known by Franke spare part 3819R) The cartridge later changed to a 20 spline version. There is no way to identify from the tap itself which cartridge you need, you will need to count the teeth on the spline. If you need the 20 spline cartridge please clickhere

We also supply the hot and cold screw cover end caps 3381R / tap indices (red and blue dot) these are plastic chrome and supplied as a pair.

Cartridges come with handle retaining screws but if you need these separately this is SS10-S (133.0069.209)

You can find the Danube tap / instruction diagram below.
If you need a replacement aerator this is our SRBLK-S, which is compatible with 133.0068.760 / 1256R

Danube tap FAQ
How do I remove my Franke Danube tap handle/Head?
First remove the end indices (hot and cold caps) from the end of the handle. These will pop out. You can then use a crosshead screwdriver to undo the retaining screw. Pull the tap head/handle off.

How do I remove the spout to replace the spout o rings?
Unscrew locking collar at the base of the spout. Pull spout up and out of tap body. Replace o rings. Grease the new o rings using a suitable silicone grease

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.