sales@tapmagician.co.uk 01444871313

Trade Registration | Shopping Basket 0

Compatible Spare Parts for the San Marco Blade

Please select from the available product options shown below
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SMBladeMV-CRClockwise (to open) red39mm Mini Valve£10.99 Monday
SMBladeMV-ABAnticlockwise (to open) blue39mm Mini Valve£10.99 Monday
SMBladeMV-PPair (1 x red, 1 x blue)39mm Mini Valve£21.98 Monday
SMBladeMV-PTPair with fitting tool39mm Mini Valve£31.97 Monday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK35-SSingleSpout O Ring Kit £6.99 Monday
SL05-SSingleLubricant£3.50 Monday
SL50-SSingleRegin Grease 50ml£9.99 Monday
SS06-SSingleM5 x 6mm round head grub screw£3.49 Monday
SK01-SSingleSet of Allan Keys£1.99 Monday
SS06-SSingleM5 x 6mm round head grub screw£3.49 Monday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Monday

Tap Magician compatible spares to suit the San Marco Blade tap

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by SP3794, 3308R, 133.0150.219 Cold and 130.0120.220 Hot. Hot and cold valves available

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

How To remove the handle: there will be a grub screw on the underside of the handle. If you require an allen key to remove the handle then you can purchase our Allen Key Pack (SK01-S). The handle will then pull off.

How to remove your cartridge - Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout. Our kit is compatible with the 3473R.

You can find the Como tap / instruction diagram below.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.