Compatible Spare Parts for the Lamona Arona

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
AronaMV-CRClockwise (to open) red39mm Mini Valve£9.79 Tuesday
AronaMV-ABAnticlockwise (to open) blue39mm Mini Valve£9.79 Tuesday
AronaMV-PPair (1 x red, 1 x blue)39mm Mini Valve£19.58 Tuesday
AronaMV-PTPair with fitting tool39mm Mini Valve£29.57 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK35-SSingleSpout O Ring Kit £6.99 Tuesday
SS81-SSingleM4 stainess grub screw for Handle£3.00 Tuesday
SK01-SSingleSet of Allan Keys£1.99 Tuesday
SA03-SSingleHandle Adaptor & Screw £3.50 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
ST03-SSingleBox spanner for Mini Valve£9.99 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday


Tap Magician compatible spares / parts to repair the Howdens Lamona Arona TAP9103 kitchen Monobloc tap.

Watch our video below for guidance / how to change your Quarter turn ceramic valves.


If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by SP3308 3308R SP3794 3794R hot and cold valve replacements available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

Original tap handle adaptor code SP3530 3530R.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 3527R.

How to remove the handle:
Loosen grub screw on the underside of handle using a 2mm allen key (SK01-S). Then pull the handle horizontally away from the tap.

How to remove your cartridge - Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to replace the spout o-rings:
Loosen grub screw on the rear of body using a 2.5mm allen key (SK01-S). Then pull the spout vertically away from the body.

You can find the Arona tap diagram/instructions below.


Cartridges can be known by glands, inserts, ceramic disk valve

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.