Spare parts to replace the swirl tempo kitchen mixer dual lever monobloc tap.

If your Swirl tempo is leaking or dripping out of the spout it is time to replace the ceramic disc quarter turn tap valve inserts.

If your tap is leaking at the base of the spout this is the Orings inside the spout which need replacing.

FAQ

How do I remove the swirl tempo tap handle?
The tap handle is removed be taking out a small cap on the end of the tap handle marked H / C and then undoing the screw below. You will need a crosshead screwdriver to remove the screw.

The original cartridge uses a yellow plastic spline adaptor (handle carrier) If you need a new adaptor this is our SA06.

How do I remove the cartridge?
Ensure your water is turned off at mains or with isolation valves under the sink
Use adjustable or 17mm spanner to undo cartridge. The cartridge will unscrew anti-clockwise. Some water will seep out so keep a cloth handy

Watch our handy tutorial video to guide you through "how to" change the cartridges. This is an easy DIY job