RANGEMASTER VERTEX TWIN LEVER MONO KITCHEN MIXER SPARES

Tap Magician compatible replacement spares to fit the Rangemaster Vertex Twin Lever Mono Kitchen Mixer TVX1BF.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

If your tap is leaking from round the neck (where the spout joins the tap body) then the seals inside the spout need replacing. You need to replace all parts from the O'Ring seal kit.

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome and brushed chrome).
Original codes known by 133.0068.762 SP1263 /1263R CH. Your original part may have Neoperl stamped around the edge.

Rangemaster Vertex Frequently asked questions

How to I remove the Rangemaster Aquatrend tap handle / levers?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, using appropriate size Allen key (SK01-S).
Step 2. Pull the handle away from the tap body.
Step 3. Unscrew decorative shroud from the tap body anticlockwise.
Step 4. Use an adjustable spanner to undo the cartridge locking nut.
Step 5. Remove old cartridge from the tap body.
Step 6. Fit your new cartridge in place and reverse the steps to refit the handle.

How do I know if need the adaptor bush?
Until you remove the cartridge from the tap you will not know if you need this part.
This is because sometimes the bush gets corroded to the tap and remains in the tap body, and other times it comes out corroded to the tap cartridge.

Can I remove the adaptor bush from the old cartridge?
Yes you can but it can be very hard to remove due to corrosion.
You can try using very hot water, followed by cold water over it, to help break the corrosion seal.
The bush unscrews from the cartridge anticlockwise.
You will likely need to use some grips or put it in a vice to remove it.
If you cannot separate it you will need to replace the bush.