PAINI COX CRUCIFORM SPRING KITCHEN TAP SPARES
Replacement spare parts for Paini Cox Cruciform Monobloc Spring 78CR488UK / 78PW488UK.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the end of the spout then it is time to change the cartridges.
Cartridge has 20 teeth on spline. Hot and cold valves available.

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking where the spout joins the tap body then you need to replace the O Rings inside the Spout.
When you replace the new rubber seals they need greasing with a silicone grease.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.


PAINI COX CRUCIFORM SPRING FREQUENTLY ASKED QUESTIONS

How to I remove the Cox Cruciform Monobloc Spring Levers?
There is a grub screw is located at the back of the handle.
Once grub screw has been undone you can pull the crosshead handle off. unscrew shroud anti-clockwise. You can now access the ceramic cartridge

How do I replace the tap cartridge?
First make sure you turn the water off.
Use 17mm or adjustable spanner to undo cartridge (it will unscrew anticlockwise).
Fit new cartridge (clockwise) and replace the tap handle.