sales@tapmagician.co.uk 01444871313

Trade Registration | Shopping Basket 0

Compatible Spare Parts for the Clearwater Corona

Please select from the available product options shown below
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
CoronaMV-CRClockwise (to open) red39mm Mini Valve£10.99 Monday
CoronaMV-ABAnticlockwise (to open) blue39mm Mini Valve£10.99 Monday
CoronaMV-PPair (1 x red, 1 x blue)39mm Mini Valve£21.98 Monday
CoronaMV-PTPair with fitting tool39mm Mini Valve£31.97 Monday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ST03-SSingleBox spanner for Mini Valve£9.99 Monday
SL05-SSingleLubricant£3.50 Monday
SK01-SSingleSet of Allan Keys£1.99 Monday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Monday

CLEARWATER CORONA SPARES

Tap Magician compatible spares parts to repair the Clearwater Corona COR2CP & COR2BN Kitchen monobloc tap.
Watch our help video below for guidance / how to change your Quarter turn ceramic valves.


If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by SP3794 3794R.

Cartridge has 28 teeth on spline. Hot and cold valve replacements available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from round the neck (where the spout joins the tap body) then the seals inside the spout need replacing.

Frequently asked questions about your Clearwater Corona tap.

How to remove my tap head/handle?
Use an allen key to remove grub screw on the underside of the handle. The handle will then pull off.

How to remove the Spout?
Use an allen key to undo screw at the back of the spout. Pull spout up and out of tap body.

How to remove your cartridge?
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body.
The old valve may have two flats instead of a hex nut.
Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.