Compatible Spare Parts for the CDA TT50CH

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TT50CHMV-CRClockwise (to open) red39mm Mini Valve£10.99 Today
TT50CHMV-ABAnticlockwise (to open) blue39mm Mini Valve£10.99 Today
TT50CHMV-PPair (1 x red, 1 x blue)39mm Mini Valve£21.98 Today
TT50CHMV-PTPair with fitting tool39mm Mini Valve£31.97 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today


CDA TT50 KITCHEN TAP SPARES
Tap Magician compatible spares / parts to repair the CDA Monobloc Dual Level Traditional White Handles Kitchen Mixer Sink Tap TT50CH.


For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3794R.

Cartridge has 28 teeth on spline. Hot and cold compatible valves available.
You will require our Clockwise open cartridge for the hot side, and Anti-clockwise open for the cold side.
If you require both then you can select "Pair".

Frequently asked questions about your CDA TT50 tap.

How do I remove the tap cartridge?
First make sure you turn the water off.
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body.
The old valve may have two flats instead of a hex nut. Our tool has two ends.
One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to identify my CDA tap? How to repair my leaking CDA TT50 tap?
Spares available for CDA TT50.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.