Compatible Spare Parts for the Deva Taurs

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TaursQA-ABAnticlockwise (to open) blue1/2" x 20 x 52mm £10.99 Today
TaursQA-CRClockwise (to open) red1/2" x 20 x 52mm £10.99 Today
TaursQA-PPair (1 x red, 1 x blue)1/2" x 20 x 52mm £21.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ST17-SSingle17mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today


DEVA TAURS TAP SPARES
Tap Magician compatible spares / parts to repair the Deva Taurs Kitchen monobloc tap.


Cartridge may have CHG CH20 stamped on it. Compatible replacement for TAUR130 SP005-046 / PUF130/CP.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Hot and cold valves available.

Cartridge has 20 splines and is quarter turn.
You will require anticlockwise for the cold and clockwise for the hot.

How to remove the Deva Taurs Lever / handle?
You will need to pop off the indices (Hot/Cold end cap).
Once removed you will need to undo the screw and slide the handle off.

How do I replace the tap cartridge?
First you will need to isolate the water.
Use 17mm or adjustable spanner to undo cartridge (it will unscrew anticlockwise).
Fit new cartridge and replace the tap handle.

Watch our how to video for further general guidance on removing tap handles.



How to identify my Deva tap? How to repair my leaking Deva Taurs tap?
Spares available for Deva Taurs.

If you need any help of advice please contact our technical advisors.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.