Compatible Spare Parts for the Cooke And Lewis Saverne

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SaverneQA-ABAnticlockwise (to open) blue1/2" x 20 x 52mm £8.49 Tomorrow
SaverneQA-CRClockwise (to open) red1/2" x 20 x 52mm £8.49 Tomorrow
SaverneQA-PPair (1 x red, 1 x blue)1/2" x 20 x 52mm £16.98 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ST17-SSingle17mm spanner£6.50 Tomorrow
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tomorrow


Cooke-And-Lewis SAVERNE BASIN TAP SPARES
Tap Magician compatible spares / parts to repair the B-And-Q Cooke-And-Lewis Saverne Basin Mixer tap.


For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Cartridge has 20 teeth on spline. Original may have BS5412 XZ 20 stamped on it.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

How To remove the tap head/handle:
Remove the chrome end cap on end of handle. Use crosshead screwdriver to undo screw.
Pull handle away from the tap and unscrew shroud anticlockwise.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.
Frequently asked questions about your Cooke-And-Lewis Saverne tap.

How to identify my Cooke-And-Lewis tap?
How to repair my leaking Cooke-And-Lewis Saverne Basin tap? Spares available for Cooke-And-Lewis Saverne Basin.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.