PRIMA CHELSEA TAP SPARES
Tap Magician compatible spares parts to repair the Prima Chelsea Dual Lever Kitchen Sink Mixer Tap.
Compatible with SGBPR2223 / BPR2222 / BPR2223 / BPR2224 models.
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".
Your cartridge may remove from the tap block with the conversion attached. See photo below.
You will need to separate this or purchase a new bush (SB26V-S)
FAQ
How do I remove the handle and replace the cartridge on my Prima Chelsea tap?
Turn water off before starting these steps.
1. Use 2.5mm allen key to undo grub screw.
2. Pull Lever off.
3. Unscrew shroud anti-clockwise
4. Your cartridge will either come out with or without the bush attached (see image above).
5. If the cartridge comes out attached to the bush you will need to separate this from the old cartridge**
6. Fit bush to cartridge if applicable.
7. Fit new cartridge in to the tap screwing it in clockwise.
8. Screw shroud on clockwise.
9. Fit handle
How do I remove the spout and change the Spout O rings?
1. Use 2.5mm allen key to undo grub screw at the back of the spout.
2. Pull Spout up and out of tap body.
3. Remove the two o rings from the bottom of the spout.
4. Fit New O rings.
5. Apply grease to new o rings.
6. Push spout firmly back into tap body
7. Tighten screw.