Teka Eider Spare Parts EiderT4 65848F135233 1

Compatible Spare Parts for the Teka Eider

Please select from the available product options shown below

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
EiderT4-CR	Clockwise (to open) red	1/2" Cartridge 28 x 52mm	£12.99		Monday
EiderT4-AB	Anticlockwise (to open) blue	1/2" Cartridge 28 x 52mm	£12.99		Monday
EiderT4-P	Pair (1 x red, 1 x blue)	1/2" Cartridge 28 x 52mm	£25.98		Monday

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
SH00MZ-S	Single	Handle Pair Monz	£17.99		Monday
SR63C-S	Single	Aerator chrome	£6.60		Monday
SR63CB-S	Single	Aerator brushed chrome	£6.99		Monday
SK22-S	Single	Spout O ring repair kit	£5.00		Monday
SL05-S	Single	Lubricant	£3.50		Monday
SL50-S	Single	Regin Grease 50ml	£9.99		Monday
ST14-S	Single	14mm spanner	£6.50		Monday
STBOX-S	Single	Cartridge Removal Box Spanner 14 / 17mm	£9.50		Monday
ST0TTK-S	Single	Monobloc Tap Tightening Spanner Set	£10.50		Monday
SI01-S	Single	Tap indices set	£5.50		Monday

Teka Eider Post 2009
Replacement spares for Eider Kitchen mixer mono bloc tap (post 2009) with 28 splines.

Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge

****Prior to 2009 the tap was known as the malaga tap and had a cartridge with 20 splines. If you have the Pre 2009 model (20 spline) then please clickhere

Original spare part code for the cartridges is 3602R and oring kit 1239R

We also supply the hot and cold screw cover end caps 3381R / tap indices (red and blue dot) these are plastic chrome and supplied as a pair. We also have complete replacement chrome handles available. These are chrome and supplied as a pair for the hot and cold.

If your tap is leaking from where the spout joins the base of the tap (the neck) then you need to replace the spout o rings original code 1239R (our code SK22_S)

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

How to remove your tap handle: Remove hot/cold indice. This will reveal a screw. Use a crosshead screwdriver to undo screw. Pull Handle/ lever off. This may require some force. Ensure you turn water off before trying to remove the cartridge.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.