CDA TC56 Spares
Tap Magician compatible spares / parts to repair the CDA TC56 Kitchen monobloc chrome tap.
(Original cartridges known by code 3819R)
Please note the Manufacturers changed the internal cartridge design in 2013 from 1212R threaded collar cartridge to 3819R to non threaded collar. This is version without collar
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
If your tap is leaking from round the neck (where the spout joins the tap body) then the seals inside the spout need replacing. You need to replace all parts from the O'Ring seal kit The original Oring kit is known by 1315R. You should apply silicone grease to the o rings before replacing the spout.
Cartridge has 20 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"
If you need a new aerator/antisplasher this is SR22X-S.(known by 1485R)
Frequently asked questions about your TC56 tap.
How to remove my TC56 tap head/handle?
Remove end indices from handle (indices available if these get damaged) Use crosshead screwdriver to undo screw. Pull handle off
How to remove the Spout?
Use 2.5mm allen key to undo screw at the back of the spout. Pull spout up and out of tap body.If you need a new spout screw you can purchase SS04-S
Watch our How to video for guidance on removing tap handles and replacing tap cartridges.