IKEA Ringskar single lever tap replacement spares

If your tap is dripping or leaking out of the spout then it is time to replace / change the flow on off cartridge.

Please note there is two versions of cartridges which have been fitted into the rinskar tap. You will need to remove your cartridge to confirm which part you need.

Our RingskarSC-S is compatible with original spare part code 117630.

Watch our help video below for guidance / how to change a single lever tap cartridge.
If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout.

Frequently asked questions about your Ikea Ringskar single lever tap.

How do I stop my Ikea tap from dripping?
If your tap is dripping or leaking out of the spout you need to replace the 35mm cartridge

How do I remove Ikea Ringskar the handle?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, using appropriate size Allen key (SK01-S).
Step 2. Pull the handle away from the tap body.
Step 3. Unscrew decorative shroud from the tap body anticlockwise.
Step 4. Use an adjustable spanner to undo the cartridge locking nut.
Step 5. Remove old cartridge from the tap body.
Step 6. Fit your new cartridge in place and reverse the steps to refit the handle.