sales@tapmagician.co.uk 01444871313

Trade Registration | Shopping Basket 0

Compatible Spare Parts for the Cooke And Lewis Bilbrough

Please select from the available product options shown below
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
BilbroughSC-SSingleSingle lever cartridge Flat 35mm£14.99 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
W449H-ABAnticlockwise (to open) blue1/2" x 38 x 49mm£19.99 Tomorrow
SK01-SSingleSet of Allan Keys£1.99 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tomorrow


COOKE & LEWIS BILBROUGH TAP SPARES
Tap Magician compatible replacement tap valve to fit the Cooke & Lewis Bilbrough single lever mixer tap.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the cartridge.

You will need our BilbroughSC-S for the main two way lever.
Our W449H-AB is compatible with the quarter turn lever.

How to remove the handle and replace the cartridge:

For the two way lever you will need to unscrew the vertical lever anticlockwise.
Once removed you will need a 2.5mm allen key to undo the grub screw.
The handle will then pull away. Unscrew the decorative collar.
Use a adjustable spanner to remove the valve locking nut and pull cartridge out.

For the quarter turn valve you will need to unscrew the vertical lever anticlockwise.
Once removed you will need a 2.5mm allen key to undo the grub screw.
Use a adjustable spanner to undo the cartridge anticlockwise and pull out.

Watch our video below for guidance / how to change your single lever kitchen tap.
Cooke & Lewis model numbers 3663602930075, 3663602930099, 3663602930082

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.