sales@tapmagician.co.uk 01444871313

Trade Registration | Shopping Basket 0

Compatible Spare Parts for the Carron Phoenix Lanark

Please select from the available product options shown below
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
LanarkSC-SSingleSingle lever cartridge Flat 35mm£14.99 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR22X-SSingleAerator chrome F22x1 12 L/Min£6.99 Today
SK18-SSingleSpout O Ring Repair Kit£5.60 Today
SS81-SSingleM4 stainess grub screw for Handle£3.00 Today
SK01-SSingleSet of Allan Keys£1.99 Today
SL05-SSingleLubricant£3.50 Today
SF048-SSingleChrome Plinth£9.99 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today


CARRON PHOENIX LANARK TAP SPARES
Tap Magician Compatible spares to fit the Carron Phoenix Lanark Single Lever Kitchen Tap.


Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge


If your tap is dripping or leaking out of the spout then it is time to replace the valve.
Original spare part known by code 1202R / 133.0069.360. 35mm single lever cartridge.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 3668R / 133.0277.067.
Please note our SK18-S is not provided with a spout retaining screw. You will need to reuse your original.

If you require a new handle retaining screw this is our SS81-S.
We have a suitable set of Allen keys (SK01-S) available to remove the handle and spout.

Tap ring plinth compatible (chrome only) with 133.0251.356 / SP3734 3734R

To replace the antisplasher / aerator you will need our part SR22X = (available in Chrome). Original codes known by 133.0068.791 / 1485R. Your original part may have Neoperl stamped around the edge.

How To remove the lanark tap head / handle and replace valve:
First you will need to unscrew the handle retaining screw by using a 2mm allen key.
You can then remove the handle and then unscrew the cartridge cover by unscrewing it anticlockwise.
Once removed use an adjustable spanner to remove the cartridge locking ring.

How To remove the spout and replace o'rings:
You will first need to unscrew the spout retaining screw by using a 2.5mm allen key.
You can then lift the spout up and replace the o rings at the base with the new parts (SK18-S).

You can find the Lanark tap diagram/instructions below.
For guidance / instructions of how to replace a tap valve step by step please click here.

Frequently asked questions about your Carron Phoenix Lanark tap.

How to identify my Carron Phoenix tap? How to repair my leaking Carron Phoenix Lanark tap? Spares available for Carron Phoenix Lanark.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.