ABODE ULTERO PROFESSIONAL TAP SPARES
Tap Magician Compatible Replacement Ceramic tap cartridge to fit the Abode Ultero Professional Single Lever Kitchen Mixer Tap AT1209.

For guidance / instructions of how to replace a tap valve step by step please click here

If your Ultero tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Original spare part known by code 1848R / ASSLC0001.

Replacement grub screw (SS04-S) and allen key set (SK01-S) available.

How to replace the cartridge:
Before replacing the cartridge you will need to turn the water off.
To remove the handle tilt the handle into the on position and remove screw /dust cap with a small screwdriver.
See diagram below.
Once removed loosen the handle retaining screw with a 2.5mm allen key and remove the handle.
Pull the decorative shroud away from the body, note rubber seal should remain inside shroud.
Hold the body of the tap firmly and using an adjustable spanner or socket to unscrew the valve lock nut.
Use an adjustable spanner to remove the cartridge.
Once this has been removed you can then remove the cartridge and replace.

You can find the Ultero Professional tap diagram / instructions below.
Frequently asked questions about your Abode Ultero Professional Single Lever tap.

How to identify my Abode tap? How to repair my leaking Abode Ultero Professional tap? Spares available for Abode Ultero Professional.
Any further questions contact our experienced technical team.

Watch our video below for guidance / how to change your single lever kitchen tap